LD3000

LD3000 Electric Label Dispenser – High Speed (2.2″/sec)

$480.00

2.25″ Maximum liner width; .25″ Minimum liner width.

QuantityPrice
1 - 11$480
12 - 23$434.36
24 + $412.00

Product Description

The LD3000 Electric label Dispenser is ideal for small, short labels and small work areas.  It will also accommodate cores sizes from 1″ to 3″. An interesting feature of the LD3000 is that it can be daisy-chained with other LD3000s for dispensing different labels at the same time which enables up to 8 dispensers to operate as a single dispenser.

Equipped with a photo sensor for accuracy, it will automatically dispense paper, vinyl, acetate, polyester and other label materials from their liners. It will even work with most clear materials. An adjustable strip plate makes dispensing hard-to-release labels easy.  The liner scrap is automatically removed and rewound for easy clean-up.  No tools are required for making adjustments for different sized labels. Made of an all metal construction, this unit requires no maintenance.

Please note that for all the minimum liner width can be very narrow, Electronic Imaging Materials does not recommend using a liner less than 1 inch wide.  Your labels can be small, but we will simply leave extra carrier to better support the material as it runs through the dispenser.

EIM warranties all parts on the above automatic dispenser against defects in design, materials, and workmanship: 360 days on parts and 180 days on labor. Made in the USA.

MODEL # LD 3000 LD 6025 LD 6050
Liner Capacity Width 0.25″ to 2.25″
(6 mm to 57 mm)
0.25″ to 4.50″
(6 mm to 114 mm)
0.25″ to 4.50″
(6 mm to 114 mm)
Length 0.25″ to 3.00″
(6 mm to 76 mm)
.125″ to 6.00″
(3 mm to 152 mm)
0.50″ to 6.00″
(13 mm to 152 mm)
Roll Capacity 6.00″
(15 cm)
12.00″
(31 cm)
12.00″
(31 cm)
Feed Speed 2.2″ / sec
(5.6 cm / sec)
1.6″ / sec
(3.9 cm / sec)
3.3″ / sec
(8 cm / sec)
Dimensions 7.00″ (L)
6.10″ (W)
10.70″ (H)
17.8 cm (L)
15.5 cm (W)
27.2 cm (H)
10.80″ (L)
10.8″ (W)
14.50″ (H)
27.4 cm (L)
27.4 cm (W)
36.8 cm (H)
10.80″ (L)
10.80″ (W)
14.50″ (H)
27.4 cm (L)
27.4 cm (W)
36.8 cm (H)
Electrical Requirements 12V DC with 100-240V adapter 100/120V 50/60 Hz,
<1 amp (220V 50/60 Hz available)
100/120V 50/60 Hz,
<1 amp (220V 50/60 Hz available)
Weight 2.8 lb. (1.27 kg) 10.5 lb. (4.76 kg) 10.5 lb. (4.76 kg)
Dispenses Clear Labels?  YES Order LD6025C Order LD6050C

Additional Information

Weight 2.8 lbs
Dimensions 12 x 16 x 12 in
Electronic Imaging Materials